ATevo Series Stationary Float Battery Charger

HindlePower's ATevo continues the AT series legacy of being the industry's most trusted operational stationary float battery charger. Utilizing proven SCR technology, ATevo is designed and manufactured with the same superior quality and reliability you've come to expect from AT series chargers. Equipped with the same AT Series features, the ATevo provides a simple user experience allowing for a "set it and forget it" approach to battery charging. New features and expandability will enable the utility to meet today's evolving operational and reliability issues.

Features & Benefits

Same legacy control as AT10/AT30 product
Standard features including: Digital Ground Fault Alarm/Metering, AC Ripple Alarm, End of Discharge Alarm, Rectifier Over Temperature Alarm, and More
Fully Graphical LCD
Digital Metering and Event Logging
Quick and Easy Field Upgradable Firmware
3 Levels of Password Protection
Easy Expandable Platform
Downloadable Manual via QR Code
Multiple Communications Platforms such as DNP, MODBUS, IEC61850

Product Quick Facts

AC Input Voltage: 120, 208, 240, 480 | | 220, 380/416 @ 50-60Hz
AC Input Voltage Tolerance: +10%, -12%
AC Input Frequency Tolerance: ±5%
AC Input Efficiency: 85-90% typical for 130Vdc at 50-100% load
DC Output Voltage Ratings: 24, 48, 130 or 260* Vdc nominal
DC Output Continuous Rating: 110% rated current at maximum equalize voltage at -10 to +50ºC
DC Output Transient Rating: Per IEEE 2405
DC Output Current Limit Adjustment Range: 50% to 110% rated output
DC Output Voltage Regulation: ±0.25% for line, load and temp. variations (*Regulation at max. extended equalize voltages may not meet ±0.25%)
Electrical Noise: 32dBrnc
DC Output Ripple: 24/48Vdc: Filtered on battery 30mVrms | Filtered off battery 1% Vrms | Battery Eliminator 30mVrms
DC Output Ripple: 130Vdc: Filtered on battery 100mVrms |Filtered off battery 2% Vrms | Battery Eliminator 100mVrms | Super Eliminator 30mVrms
DC Output Ripple: 260Vdc: Filtered on battery 200mVrms | Filtered off battery 2% Vrms | Battery Eliminator 200mVrms
DC Output Surge Withstand Capability: Designed to meet IEEE-472, ANSI C37.90a
3rd Party Approvals: IEEE 2405 | CSA | FCC
Seismic Certification: IEEE 693/IBC CBC
Operating Ambient Temperature: -1°F to 122°F (-18°C to 50°C) w/o derating
Operating Altitude: 3,300 feet (1,000 meters) above sea level without derating
Relative Humidity: 0% to 95% (without condensation)
Audible Noise: Less than 65 dBA at any point 5ft (1.5m) from any vertical surface of enclosure
Monitoring: HindleHealth® System

Datasheets

📄

Product Brochure

Search Bar

Contact Information

Emergency Power Corp
26128 West Seven Mile Rd
Redford, Michigan 48240

Phone: (313) 535-1434
Fax: (866) 522-5022

sales@emergencypowercorp.com

This sidebar section will remain locked in place while the user scrolls down to read things on the main page. It will also shift in position on mobile and other small screens.